LIST OF MANUFACTURERS THAT WE REPRESENT | |||
|---|---|---|---|
COMPANY NAME | MATERIAL | ORIGIN | SINCE |
BOTH-WELL | PIPE FITTINGS | TAIWAN | 2004 |
DELCORTE | PIPE FITTINGS | FRANCE | 2004 |
ERNE | PIPE FITTINGS | AUSTRIA | 2004 |
TECTUBI | PIPE FITTINGS | ITALY | 2019 |
M.E.G.A | PIPE FITTINGS | ITALY | 2017 |
REINFORCED BRANCH FITTINGS
For years, GULF-GLORY has been supplying self-reinforcing branch outlets, in all types of ferrous & non-ferrous materials. This include NORSOK approved Duplex and Super Duplex materials. Different tests have been carried out with The Technical Centre for the Mechanical Industry – CETIM including the collaboration of French Universities to certify the quality of branch outlets supplied by GULF-GLORY according to: MSS SP97, ASME B31.1/3/4/8 pressure piping codes.
BRANCH OUTLET:
- Weld-outlet
- Sock-outlet
- Thread-outlet
- Nip-outlet
- Elb-outlet
- Lat-outlet
INSERT BRANCH OUTLET:
- Sweep-outlet
- Insert weld-outlet
- Insert lateral-outlet
FLANGED BRANCH-OUTLET:
- Flange-outlet
- Nipo flange-outlet
- Elbow Flange-outlet
- Insert Flange-outlet
- API 6A/6BX Flange-outlet
FORGED FITTINGS
Our principal has acquired over 90 year of experience in Forged Fittings manufacturing having Europe largest production capacity of Forged Fittings as per: ASME B16.11, BS 3799, MSS SP83, MSS SP79, MSS SP95 standards. Moreover, we carry substantial stocks of finished products including grades such as Duplex, Super Duplex, and Nickel Alloys Forged Fittings, Outlet and Flanged Fittings which help us meet most critical lead times.
We produce forged fittings up to 6″ & up to class 10000 lbs
Socket weld connection: SW
Threaded connection: NPT/BSP and others…
Our product range includes:
• Tees • Caps • Plugs • Crosses • Elbows • Nipples • Swage Nipples • Couplings • Bull Plugs • Unions etc.
FITTINGS (Carbon Steel, Stainless Steel, Alloy Steel)
45D ELBOW
90D ELBOW
HEX HEAD BUSHING
CROSS
FULL COUPLING
HALF COUPLING
ROUND HEAD PLUG
SQUARE HEAD PLUG
90D STREET ELBOW
ASTM A733 – NIPPLE
BS3799 – BOSS
BS3799 – HEX NIPPLE
MSS SP-79 – REDUCER INSERT
MSS SP - 83 – UNION 3000LB
MSS SP – 83 – UNION – 6000LB
MSS SP – 95 – BULL PLUG
MSS SP – 97 – BRANCH OUTLET – SOCKET WELDING END
MSS SP – 97 – BRANCH OUTLET – SOCKET WELDING END
MSS SP – 97 – BRANCH OUTLET – THREADED END
MSS SP – 97 – BRANCH OUTLET – BUTT WELDING (END STANDARD)
45D LATERAL TEE
ADAPTER
NIPPLE BRANCH OUTLET
UNION (M/F)
LOW PRESSURE BRANCH FITTINGS
Our Principal has built decades of experience in Threading. Special “Know-how” is permanently being developed to maintain leadership in this field:
- Specially designed cutting, chamfering and tapping machines
- Production of its own Threading Taps
- In-house galvanizing facility
Raw material: Our Principal has its own socket tubing specification to optimize production (origins: France, UK and Italy).
- EN 10241 steel fittings
- Rigid conduit couplings
- ASTM A865 Merchant couplings
- EN 10241 steel sockets (BS sockets)
- Profile sockets for sprinkler systems.
- Special length socket and sockets on drawings (Boilers…)
FLANGES
Our range covers all major national and international dimensional standards. Weld flange, long welding neck, spectacle blind, spade, spacer and drip ring complete our production range.
These large stock availabilities, together with a flexible and efficient organization, allow us to provide even the most complex projects in a reasonable short time.
Size : 1/2” up to 60” all classes
Standards : International standards and customer drawing
Flanges Type
- Welding Neck
- Slip On
- Socket Welding
- Blind, Threaded
- Lap Joint
- Orifice flanges
Project business
- End users
- EPC
- Contractors
- Traders
NON-CORROSIVE PIPE FITTINGS
Sleeve
The Sleeve is inserted into the end of an internally coated pipeline. A second internally coated pipe is then slipped over the protruding half of the Sleeve so that both ends of the pipes touch the weld nubs. The fitting weld numbs ensure proper spacing for the final welding process.
The Sleeve installation is completed with a simple welding procedure that will provide a 100% internally coated pipe. The Sleeve is the most simplistic and efficient method to provide full corrosion protection for all internally coated pipeline systems.
Sleeve for Cement and Mortar Lined Pipe
The Sleeve can be manufactured to provide weld area protection for cement and mortar lined pipelines. The Sleeve is manufactured to the same thickness of the pipe lining. The result is a pipeline that does not have an I.D. restriction and has eliminated the traditional damage and loss of material durability caused by extreme heat introduced by a hydraulic set.
The cement sleeve offers the same weld area protection as the standard Sleeve installed in thin film coating pipelines. The cement Sleeve uses a multiple o-ring system and removable spacer nubs to ensure proper weld area spacing.
Unlike the tapered ends of the standard Sleeve, the cement sleeve designed for mortar lined pipes is squared on the ends. The pipeline mortar is blanked off two inches from the end of the pipleine. CCB International employs a two-part Propoxy to fill the space and fill irregularities between the pipe mortar lining and the end of the Sleeve.
Stainless Steel Sleeve for Prevention of Stress Corrosion Cracking
The Sleeve and weld band can be manufactured from stainless steel tubing using the same materials as the destination pipeline. Using the same pipeline materials eliminates the traditional problems caused by welding dissimilar metals. Additionally, the Stainless Steel Sleeve reduces potential stress corrosion cracking in the weld area.Standard weld procedures for the specific grade of stainless steel pipeline may be used to weld the Stainless Steel Sleeve into place. Specific o-rings are selected to provide the best long-term performance for the individual pipeline application.
API 5CT Casing & Tubing Couplings
Specialist of large diameter Couplings
- European largest production capacity
- Permanent stock available
- Durable partnership with reputed
- coupling stock mills (Vallourec/Tenaris)
- Casing Coupling API 5CT – 2011 (BTC-LTCSTC)
- Tubing coupling API 5CT – 2011 (EUE & NU
DIMENSIONS TO
Casing : from 4″ 1/2 to 20″
Tubing : from 1.050 to 4″ 1/2
FINISHING
GRADE MARKING
Steel Grade: H40, J55, K55, N80 type 1, P110, L80 type 9Cr, L80 type 13 Cr, C90 type 1, C90 type 2, C95, T95 type 1, T95 type2, Q125 type 1, Q125 type 2, Q125 type 3, Q125 type 4, N80Q
API 5L – 2007 Line Pipe Coupling
DIMENSIONS TO
Casing : from 4″ 1/2 à 20″ in all grades
Tubing : from 1.050 to 4″ 1/2
FINISHING
Black, hot dip galvanizing, electro plated
ENDS
Casing : (Short Round threaded / Long Round Threaded / Buttress Threaded)
Tubing : Non upset, external upset
METAL BELLOWS
Flexibility and tightness at the highest level of precision Our metal bellows are produced from ductile metallic materials.
We offer two different kinds of metal bellows:
• Edge welded bellows and
• Formed bellows
The basic element for formed bellows, a thin- walled cylindrical tube, is formed into corrugations using hydraulic or mechanical pressure. Different procedures and corrugation geometry are adopted depending on the production quantity and application. Edge welded bellows are manufactured with individual metal diaphragms that are welded together.
Whether formed or edge welded, our metal bellows:
• are extremely flexible,
• have a long life expectancy,
• do not need any maintenance,
• are resistant to pressure and to temperature,
• are vacuum-tight.
Our metal bellows are typically used as:
• shaft seals of valves
• vibration absorbers in laser systems
• volume compensators in transformers
• actuators in measurement and control applications
• flexible connection between solar panels
• sealing or ducting elements in vacuum applications
• temperature sensors
• surge arrestors
• reservoirs to store fluids
• pressure sensors
Characteristics of our formed bellows:
• single or multi-plied
• offer considerable axial, lateral or angular movements
• diameter 6 to 2100 mm
• can have special coating (cu, au) and surface finishing
• made from special materials like titanium, NI-alloys
• special thermal treatment’s
Characteristics of our welded bellows:
• single or multi-plied
• diameter 6,4 to 584 mm
• almost unlimited span (distance ID to OD)
• compressible to solid height
• have a much longer stroke per convolution
• can be made of any roll able, weld able metal
• extremely low spring rates possible
• resistant to nicks and dents
• high degree of translational &arcuated motion
• diaphragms: wide thickness range